Microinfusion safety guide
Content
1
Safety Guidelines
Safety Guidelines: PLEASE READ THE BELOW CAREFULLY
- if you have a skin condition, consult your dermatologist before use.
- Wash your hands and face thoroughly before and during treatment, or wear gloves for added safety.
- Always sterilize the device after each use.
- Conduct a patch test on a less visible area of your skin beforehand to gauge your skin’s reaction and expected downtime.
- Use a new needle head cartridge for every session, attach it to your device, and avoid touching the needle tips.
- Apply high-protection sunscreen after treatment.
- Avoid using topical retinoids for at least 24 hours before treatment.
- if you have active blemishes, you can treat close to the area but avoid stamping directly on breakouts.
- Apply gentle pressure—do not press too hard.
- Steer clear of delicate areas like the eye region.
- Do not proceed with treatment if your skin is irritated or inflamed.
- Do not repeatedly go over the same area too many times.
- Apply high-protection sunscreen and keep the treated area out of direct sunlight for up to 72 hours after the procedure.
- Avoid cosmetic serums or oils during and after treatment.
- Do not use on raised scars.
Important Notice:
This treatment is not intended to diagnose, treat, cure, or prevent any disease. If you have any skin conditions, are pregnant, or breastfeeding, please consult your doctor before use.
Warning:
If you have metal allergies or any medical concerns, speak with a healthcare professional before using this device. Improper use, failure to follow instructions, or applying it to unintended areas may lead to unwanted effects. LiftLab Skin and its affiliates are not responsible for any issues resulting from misuse. Always use as directed for the best and safest results.
2
How to use
Double cleanse your skin to remove all makeup, lotions, and impurities. Any dirt, oil, or stray hairs that come into contact with your face can increase the risk of irritation or infection.
Prepare your treatment area by sterilizing the surface and keeping an alcohol disinfectant nearby. Avoid touching anything other than your skin and the device during treatment, as contact with serum bottles, brushes, or other objects can lead to cross-contamination.
- Twist open the device chamber.
- Break the seal of the serum vial, remove the rubber stopper, and carefully pour the serum into the chamber.
- Break the seal of the serum vial, remove the rubber stopper, and carefully pour the serum into the chamber.
- Place the device upside down and let it sit for 1-2 minutes.
- Meanwhile, cleanse your face and ensure your hands are clean before starting the treatment.
- Begin at the center of your face and move outward to ensure full coverage.
- Stamp with a 50% overlap, meaning each new stamp should overlap the previous one by half.
- Ensure the serum is positioned at the end with the needles while stamping to maximize infusion into the skin.
- If the serum isn’t flowing through the needles, try tilting your head back slightly or angling the device toward the ceiling to help guide the serum downward.
- Tip: Place the lid back on, turn the device upside down, and tap the end firmly a few times to encourage the serum to flow into the needles.
- Remove any remaining serum from the device and gently pat it onto your face and neck.
- After completing your treatment, securely place the lid back on the device.
- Twist off the needle head and dispose of it safely.
- ALWAYS use a new, sterile needle head for each treatment.
3
POST TREATMENT CARE
- For the next 24 hours:
- Do not apply makeup.
- Avoid excessive sweating, pools, and direct sun exposure.
- Avoid touching your face after touching unsterile surfaces.
- Do not exfoliate or cleanse skin.
- After 24 hours, your skin should be well on its way to healing for your renewed skin.
4
FAQ
Answer 1
Answer 2
Answer 3